1.      GSM850/900/1800/1900MHZ

2.      Wireless frequency between detectors and main panel: 315/433/868MHZ (Optional)

3.      8 wired zones, 32 wireless zones. Match the wireless detectors with the zones of  main panel by learning code

4.      With color LCD, keypad and emergency button on the main panel itself.

5.      With internal & external siren (Optional)

6.      With internal & external MIC (Optional). The MIC connector is placed at the back of panel.

7.      With backup battery. Working hours: More than 12h.

8.      With one relay output. The relay output can control the light on/off.

9.      The antenna of PIR, door/window contact, Remote etc inside.

10.  The ON/OFF switch on the PIR detector is paced inside the casing.

11. Human voice guide and password protection.

12. Record your voice in the mainframe in advance and play it while alarming.

13. Fixed time arming/partial arming/disarming

14. Entry delay alarm and panel opened alarm.

15. Send SMS to 3 mobile phone No. and Auto-dial 3 phone No. while alarming.

16. Arm/disarm and check the system wherever you are.

17. Program the system by keypad, SMS or phone.

18. Modify name of wireless zones by SMS.

19. Report the alarm zone & type by LCD, SMS and voice while alarming.

20. Call the mainframe any time and listen what happened in the alarm area.

21. Door/window open reminder. After the main panel is armed, it will voice “di, di” and show you with LCD if the door/window is open.

22. Low voltage alarm. The main panel can detect it when the voltage of battery in detectors is low, then send SMS to remind of you to change the battery.

23. Switch to Backup rechargeable battery when the power is failure or cut by intruder and will send SMS and call you.

24. Send alarm signals to monitoring center through GSM network, such as the police station.